Monthly Archives: March 2012 - Page 2

Glossary

Note: One of the challenges of this project has been dealing with a lack of appropriate terminology and notation.  What I’ve come up with seems complex on the surface, so I’ll be explaining things as I go.  This time around, I have a glossary of terms to help readers understand just what the heck it is that I’m talking about.

I’ve made up a lot of terminology while working on this site, and while it makes sense to me, I do not guarantee that it is entirely correct or even comprehensible to an outsider.  Just so we’re all on the same page, here’s a guide to the language I use around here.

Certified Autograph Card

A player signature on a card or an item attached to a card bearing a certification of the signature’s authenticity.  Methods for certifying authenticity vary by manufacturer.  Cards that are not received from the manufacturer with a signature but are signed at a later date and are authenticated by a third party do not count as certified autograph cards; if the certification is performed by and obtained from the manufacturer in an official product release (either in a box/pack or through redemption), the card does count as a certified autograph even if the authenticity certification is on a separate document.

Chain-stitching

Style used in patches worn mainly by the Phillies, Cardinals, and Astros.  Looks somewhat like miniature latch hook rugs.

Cool Base

 

 

 

 

Uniform style incorporating advanced moisture-wicking fabrics.  Cool Base jerseys use a rectangular mesh base fabric with four pinhole mesh side panels (two on each side, one under the sleeve and one under it on the body).  These were first used for the 2003 All-Star game and became standard across most teams over the next decade.

Or at least that was my guess.  After finally breaking down and buying an authentic Cool Base Mets batting practice jersey (couldn’t resist the 25% off), I found completely different materials that were instead a match for the materials in 2011’s All-Star workout jerseys.  Do the materials above have a different designation or did the Cool Base formula change?  I am really out of my depth here…

Diamond Mesh

 

 

 

 

Lightweight synthetic fabric used in outer jerseys starting in the 1980s.  This material can be identified by the large diamond-shaped holes in the fabric.  The size and spacing of these holes varies.

Double Knit Polyester

Synthetic uniform fabric weave first used in baseball uniforms in the early 1970s due to lighter weight and superior moisture-wicking properties as compared to flannel.  Double knit was better suited to coloring, which, combined with the expanding television market in the 1970s, resulted in brightly-colored uniforms typified by the famous 1975 Astros uniform.

Drop Shadow

A black or otherwise dark-colored clone of text or logos that is offset from the cloned text usually down and to the right.  Drop shadows were introduced in Mets uniforms when black was made an official team color in 1998 and were used on all white, gray, and pinstripe jerseys until their removal for the 2012 season.  And there was much rejoicing.

Flannel

Typically cotton fabric used in baseball uniforms up until the early 1970s when uniforms switched to double knit polyester.  Flannel continues to be used in some throwback jerseys.  Flannel jerseys have difficulty holding coloring, with most colors fading to a dull gray.  Pinstriped flannel jerseys all have the colored stripe sewn into the material with a width of six stitches (mostly pre-war) or three stitches (mostly post-war).

Game-Used Card

A card containing a piece of material used or worn in a game.  Personal game-used items can include uniforms, bats, gloves, shoes, hats, jackets, etc.  Other material such as balls, bases, outfield wall padding, on-deck circles, etc. may have been used in a game without necessarily being associated with a particular player.  One of several types of cards referred to as a “relic” by Topps.

Glacier Twill

 

 

 

 

 

Herringbone pattern added to the top layer of multilayer Mets patches in the late 1990s.  No other MLB team has adopted this style of patch.  Glacier twill appears to have been removed along with drop shadows for the 2012 season.

One of One (also “1 of 1” or “1/1”)

A One of One card is any serial numbered card marked with a print run of exactly one.  This is typically noted with foil stamping or hand-printed ink designating the card “1/1” or “1 of 1” (“One of One” or a zero padded variant like “01/01” is less common but still acceptable).

This term is not interchangeable with “unique,” “rare,” “one of a kind,” or any other designation that does not refer to a singular serial numbering.  The terms “like a 1/1,” “eBay 1/1,” and “some would consider this a 1/1” have no meaning and should be disregarded, but not before noting that the person using these terms is an idiot and/or scumbag.  The term 1/1 cannot be reached as an equivalent through division (e.g., 25/25 does not equal 1/1) nor does it refer to the first in a run of serial numbered cards (e.g., 001/100) or a card with the number of a player’s jersey (e.g., 08/25 for Gary Carter).  No card without a form of serial numbering indicating a print run of exactly one can be considered a 1/1 EVER.

Patch

 

A non-structural uniform component attached to a uniform or other type of material by stitching for the purpose of identification of the player or team or commemoration of people, places, or events.  Laundry tags, MLB Logos, and other errata, while nice to look at, do not count as patches for the purposes of this site.

Pinstripe

A regularly-spaced printed or sewn-in colored line on the outer layer of a uniform.  Pinstripes are typically between 1/16 and 1/8 of an inch in width spaced approximately 1″ apart.

Piping

A non-structural strip of material attached to a uniform or other type of material by stitching for decorative purposes.  Not considered a patch.

Pinhole Mesh

Collective term for a variety of fabrics with very small evenly spaced holes.  This material is typically used for moisture-wicking purposes in areas under the arms and at the sides or as undershirts.

Rectangular Recessed Mesh (Pique)

Type of fabric weave consisting of typically rectangular depressions in the texture of the fabric.  Unlike true mesh, these depressions do not go all the way through the material.  The proper term is “pique,” but I didn’t find that out until it was too late to adjust my classification system.  Used as the base material in Cool Base jerseys.

Relic

Generic term used by Topps to refer to a card containing game-used or manufactured materials.

Serial Numbered Card

A card with a handwritten or foil stamped number that is unique to each copy produced.  To qualify as a serial numbered card, the card must indicate both the print run (typically shown as the denominator in a fraction separated by “/” or a word or number after the word “of”) and the card’s unique number in that print run.  Cards with just a print run (e.g., 300 cards all marked “One of 300”) are not considered serial numbered cards.

Side Panel

Section of a jersey under the sleeves that is made from a different color and/or material from the base jersey.  Side panels are common features on most modern baseball jerseys.

The Side Panel: Visual guide to spotting jersey variants in the wild

As I start accumulating posts, they will inevitably sort themselves out into various categories based on content.  For everything else, there’s The Side Panel, a collection of random rants and ruminations and musings and mutterings on minutiae.

For this first official appearance of The Side Panel (not to be confused with my earlier piece on The Number 18, which is unofficially the first, perhaps the zeroth), I’ll be looking at this feature’s namesake, the often overlooked side panels in modern high-tech jerseys.  If talk about armpits is your thing, um, welcome.  Or not.  Anyway…

Baseball uniforms have come a long way from the heavy flannel uniforms of the sport’s early years.  As competition got tougher with more fans and more revenue, teams looked for every possible advantage the rulebook allowed (and a few it didn’t).  In the days of synthetic material, changing the uniform has provided a way to both improve performance on the field and attract the attention of fans, now more likely to watch on television (either the physical box or the feed streamed over the internet) than in person.  The modern baseball uniform is made as much to appeal to fans as it is to the player who wears it, so the ideal uniform is colorful, stylish, comfortable, and able to handle dirt, sweat, and the occasional fastball.

The big trend in uniforms over the past decade has been the introduction of Cool Base materials.  The Cool Base jersey uses multiple different types of fabric to presumably perform different functions appropriate to the location of the material.  Look, I’m no fashion expert, I’m just guessing here.  It can’t be a coincidence though that the areas most likely to see lots of moisture are made of a different material than the rest of the jersey.  And having panels of different materials makes it easy to mix different colors on a jersey, resulting in the common color patterns that have been seen on countless batting practice and special event uniforms.

Futures Game and All-Star Jersey Variants

When you add in the inclusion of jersey swatches in baseball cards, these side panels, sometimes differently colored, sometimes not, introduce possible variants among the boring sameness that plagues today’s game-used offerings.  These variants were first sighted in quantity in the 2005 All-Star workout jersey swatches featured in 2005 Topps Updates and Highlights (the 2003 All-Star and Futures Game jerseys featured a smaller secondary material section around the sleeves, but pieces of this are hard to come by).  While the main colors of orange for the NL team and blue for the AL team were common, blue NL and white AL jersey swatches were occasionally seen.  These were pieces from the jersey’s side panels and this was the start of a trend that would continue through All-Star, Futures Game, WBC, and regular MLB jerseys in years to come.

So does anyone care about these “rare” variants?  Not really.  I’m pretty sure it’s just me.  Looking at the prices I’ve paid for the variants vs. the normal versions, there’s really no premium based on material type/color (though the same is true for most serial-numbered parallels, so it could just be that the market is generally indifferent towards things that aren’t sufficiently different).  I like some variety in my collection though, so I set out to get as many of these variants as I can find.  And so can you!  Here are some helpful hints to get you started.

Know the Game

Pedro Martinez WBC jersey ariants and Blake Forsythe Team USA jersey variants

Baseball uniforms today come from a variety of sources.  In addition to regular season MLB games, spring training games, the annual All-Star event (with its associated Futures Game), minor league games, the World Baseball Classic, Team USA, and various other random events produce jerseys that could make it into cards.  Identifying the sources is the first step toward finding variants.

Know the Uniforms

2010 Futures Game jersey photos with all three colors visible

The colors of the uniforms themselves will often provide clues about the source of the materials in cards.  Knowing the colors of the uniforms in question will help to determine whether variants are commonly available and will let you know when to stop looking for more.  It can take years to find some of these variants, so knowing what you’re looking for is essential.

Know the Materials

Not all variants are conveniently color-coded.  For the Mets blue Cool Base jerseys (I’m guessing these are batting practice and/or spring training jerseys), the side panels are the same color as the main body of the jersey.  How are you supposed to spot them from the tiny out-of-focus pictures people post on eBay?  The simple way is to look for white or otherwise lighter colored spots in a regular pattern in the jersey swatch.  Mesh side panels have holes in them, so the card’s backing will show through from certain angles.

Know the Products

The most obvious products to search for jersey variants are the annual Topps Update and whatever Bowman product gets Futures Game jerseys.  Other fall releases are also good places to look, primarily Topps Triple Threads.  It is common to find Triple Threads triple jersey cards with two or three of the different color variants from a special event jersey.

One-off products like 2009 Topps Unique and 2009 Topps Ticket to Stardom are also a common landing spot for whatever extra material Topps finds laying around from the last decade or so.  Above are pieces from a Jose Reyes 2002 Futures Game jersey, a David Wright 2004 Futures Game jersey, and a side panel from a Johan Santana 2007 All-Star workout jersey.

Know the Players

Sometimes, interesting pieces can show up in strange places.  When Topps took over distribution of All-Star workout jersey material in 2004 (starting with pieces from the 2003 All-Star event), their All-Star Stitches insert set became the default home for everything All-Star.  Swatches from various 2003 All-Star workout jerseys appeared elsewhere in 2004, but Topps has since managed to corral at least the first use of just about every jersey into what is now the premier game-used insert set in the annual update product.  There are exceptions though, so it pays to know who was at the All-Star event but didn’t make it into All-Star Stitches, as was the case for Paul Lo Duca in 2005.  Instead of showing up where you would expect, his 2005 All-Star workout jersey appeared in 2006 Topps Turkey Red.

2011 Mets Draft Class Autographs

Jack Leathersich joins the club, has anyone seen Tyler Pill?

Full list of 2011 Mets draft picks

With a new front office in place and a woefully bare farm system to replenish, the Mets were more aggressive in the 2011 draft than they have been in years. Less than a year later, seven members of the 2011 draft class have appeared on certified autograph cards. Christian Montgomery appeared in a Team USA autograph in 2010 Bowman Chrome prior to his 11th round selection. Top picks Brandon Nimmo and Michael Fulmer made their debuts in 2011 Bowman Chrome Draft Picks and Prospects at the end of 2011. They were followed by Cory Mazzoni (2nd round), Logan Verrett (3rd round), and Phillip Evans (15th round) in January’s Donruss Elite Extra Edition. Jack Leathersich (5th round) made his autograph debut six weeks later in 2011 Playoff Contenders, skipping over Tyler Pill (4th round). I’ll update the board as more players (hopefully) join the certified autograph ranks in future products.

1 Brandon Nimmo 1s Michael Fulmer 2 Cory Mazzoni 3 Logan Verrett
4 Tyler Pill 5 Jack Leathersich 6 Joe Tuschak 7 Cole Frenzel
8 Daniel Muno 11 Christian Montgomery 13 Robert Gsellman 15 Phillip Evans
18 Travis Taijeron 21 John Gant 34 Seth Lugo 35 Chasen Bradford

Player Spotlight: R.A. Dickey

For the first Player Spotlight, I’m going with the Mets’ biggest star over the last two years.  No, not David Wright.  Or Jose Reyes.  Or Carlos Beltran.  OK, all of those guys have a decent case, but I’m going with knuckleballing face-maker R.A. Dickey.  While I would ordinarily focus on game-used and autographed cards, Dickey’s greatness has thus far been overlooked by Topps.  Instead, here’s a sampling of Dickey’s few cards released since 1997.

Powerless without the beard

Dickey’s story is the same as most underappreciated heroes.  He started as a promising young pitcher drafted in the tenth round of the 1993 amateur draft, but chose to go to college and improve himself and his draft position.  His work paid off, resulting in a first round selection by the Texas Rangers in the 1996 amateur draft.  Everything was going right for Dickey until the Rangers discovered that he was a misunderstood freak of nature.  Dickey was forced to settle for a reduced signing bonus and toiled in the minors for the pitching-starved Rangers for most of the next decade.

Read more »

Product Spotlight: 2011 Donruss Elite Extra Edition

Too legit to quit, not quite legit enough

Donruss’s Panini incarnation has suffered from one major setback – the lack of licenses to use Major League Baseball players or team logos.  After Playoff/Donruss bid farewell to licensed MLB products in a blaze of Absolute Memorabilia glory, the brand fell on hard times.  Limited to minor leaguers and retired players, Donruss managed to release a few passable products before being absorbed by Panini.  Topps outlasted Upper Deck and claimed the title of MLB Survivor, but then Panini swooped in and secured a license – from the MLB Players Association.  While that wouldn’t give Panini the rights to use MLB team names and logos (Upper Deck paid a hefty price for crossing that line in 2010), it did give them access to the MLB roster of players for the first time in six years.  2011 Donruss Elite Extra Edition (released in January 2012, the first of several “2011” Panini releases in 2012…) positions the brand to begin chipping away at the Topps monopoly (mk. II) by laying down a thick foundation of prospects.  Will that be enough to draw collectors back into their fold?

Read more »